Time
13 hours 57 minutes
Difficulty
Beginner
CEU/CPE
14

Video Transcription

00:00
Hello and welcome back to I see anyone interconnecting Cisco networking devices. Part one This episode 3 to 4. Villain configuration and verification. I am Trend, dear. I'll be your instructor for this course
00:14
You asked the new one over the two trucking protocols and how you consented data between two different reliance. That was totally covering how to configure a V lane on a switch. And how do you figure the interface is to use them?
00:27
We're gonna be doing? We're gonna get figure of villain. We're gonna add to switch at interfaces to that V lane that we're gonna verify our configuration.
00:36
So go over quick. Pre assessment here. What? Two commands will create a V lan. I'm not sure what I hint started Realize, too, but
00:48
all right, it is viewing 10 switchboard access of viewing 10. So show you here in a minute. Why that 2nd 1 works
00:58
press a quick live set up here.
01:00
We have the surface on villian 20
01:04
and the Kelly clinics and a boon to left up
01:07
is gonna be sitting on a villain 10. They're all connected to to switch one currently
01:14
and we'll be setting up those management. I p addresses for villian tenant delay and 20 here in just a moment.
01:22
So here's some of the base configuration commands were gonna use. So show Vilhena brief is gonna show your V lions show you your trunk ing. It's good overall, you So it's in your global configuration. If you type in viewing one,
01:34
that's how you can create your villains then from there, if you want to give it the name you know, sales, accounting, human resource is I t department, something like that back in global configuration. If you go to interface villian 10
01:51
gonna bring into the interface configuration, you'll type in i p address, and that'll give you your management i p address for that villain.
02:00
That way, this way you could get SS Asian and switch or telling that something like that, or you can use it as a ping. You know you want ping er
02:07
switched to make sure you can hit it
02:09
and then back into the interface configuration for a switch port for fast ethernet zero to let's say, if you do a switchboard, access villian 10.
02:20
Put your access port into you and 10
02:23
and then generally good idea to put your
02:28
force your moto access.
02:30
Uh, we'll show some of the other. Mullins is well here in our lesson.
02:36
We're gonna go ahead and move into a demonstration here. I'm gonna go ahead and create the land 10 and delay and 22. Feeling 10 we're gonna do with the villain. 10 command of U and 20. I'm actually gonna do it. That switchboard in the interface configuration mode,
02:50
we're gonna name them
02:53
Print and
02:54
Interfaces two and 62 billion. 10 interface for a villa in 20
02:59
like we had in the
03:02
picture there.
03:04
We're gonna create those management I p addresses and we'll test all the pings.
03:07
All right, so I've gone ahead and configured my Kelly box And by going to laptop to have the configuration I P addresses
03:16
no tested, those will ping back and forth. So far,
03:21
the surface laptop won't be paying anything yet until you create that management interface.
03:25
So I will go ahead and bring up the party session here.
03:30
Oh, let's get logged in.
03:34
Cyber Very
03:36
enable.
03:38
And, uh, all right, we're in, so I still have our normal base configure on here. Uh, I always say that to the start of config. And then after each lab or after each lesson, I just do a reload. Bring it back to that normal base config.
03:53
All right, so let's go ahead and add the lion 11th. So we're gonna enter for just global config here. We'll just type in view and 10
04:02
and that is added home name. It sails,
04:09
do a exit.
04:13
We'll go into interface. So much gonna do a range here.
04:16
Okay,
04:18
02 comma 06
04:23
And we want to do a switch. Port mod access
04:27
switch. Port access villian 10.
04:32
So here we want to
04:35
I won't go back and, well,
04:39
go ahead and move or create that view. Lying 20. So your face FAA is 04
04:46
and then here will do switch ports
04:49
mod access. We're going just to get that done.
04:53
Such ports Access Villain 20
04:57
Here It says access does not exist, and now it's created.
05:00
So let's go ahead and create the management. Their faces here. So let's do a show. V Leandro, Quick Cleland brief.
05:11
So here we have.
05:13
Well, I intend with two and six
05:15
villain 20
05:17
before, So let's go ahead and name 20 real quick
05:21
I would be lying 20
05:24
name
05:25
counting
05:28
and see if that works.
05:30
All right,
05:32
now we have feeling twenties accounting. Let's go ahead and create the interface management. I p's
05:40
so config t
05:42
we go to interface villain 10
05:46
i p address
05:47
What turned up Wonder wonder turn to for defiant to the two fortified zero
05:56
I understand.
05:57
On DDE
06:00
go figure terminal do interface feel and 20
06:04
attended at 1 to 10.
06:10
I believe me
06:12
checks that real quick.
06:14
One down, 2 to 2010.
06:18
Okay, let's get back into the demo.
06:25
Wanted to attend to it for two, for deferring to defend that zero.
06:35
Okay,
06:41
very
06:43
helps you be told what's supposed to do
06:46
now If you do a show, i d interface grief
06:50
We should have all the i P addresses in there now.
06:55
All right,
06:58
so we have our management I p's We've named RV lions. We've had to be alliance to the interfaces.
07:04
Let's go ahead and test the pings, so I will bring up Kelly here.
07:10
Hey, it's it's hump.
07:14
All right, So you can see we have
07:17
10. 11 50.
07:20
So still a ping to 10 Wanda one. That 51. This is a boon to laptop,
07:29
and we're getting a response.
07:31
So let's just go to 10. A 10. This is the management I p. Address.
07:35
Okay. And we're getting a response.
07:39
Now, remember, we're not gonna be able to be pink veal in 20 because this isn't a layer three switch in it. We don't have the router set up,
07:45
so I was gonna run over to the surface Racine Road, quick. And we will go ahead and try to ping it.
07:50
All right, So we good paying the veal and 20 management interface from the surface laptop. So we are good to go. We have tested all of the pings.
08:01
So a post assessment here we get to party, session of the way.
08:05
What configuration mode to you need to be in to add interfaces to a villain. I realize this kind of you gotta think about that 1st 2nd So what mode are you? And when you add the interface to the veal and think about it for a second and then go ahead and a NPAs it video an answer.
08:28
All right. It is the interface configuration.
08:31
So as you as we go on to his course, I'm gonna create a little more,
08:37
I guess. Thought provoking questions. Um,
08:41
the tests are gonna kind of play a little trickery and word sometimes. So they really just gotta slow down. Think about what the question is asking and then answer it.
08:52
All right. In the next episode, we're going to go over the V t p concepts, trucking configuration and verification.
09:01
And as always, if you guys have questions, need help. Feel free to shoot me. Message. Otherwise, thank you for watching this episode forward to seeing you next one.

Up Next

CCNA ICND1

This course will enable students to understand virtualization and cloud services, and network programmability related to LAN, access and core segments.

Instructed By

Instructor Profile Image
Trenton Darrow
Network Engineer at NCI Information Systems, Inc
Instructor