2 hours 8 minutes
Hello and welcome back to Sai Berries Infrastructure Services. This lesson will be the network interface verification, and we'll take a look. Also at the ICMP. I have an instructor trend, Darryl, So let's go ahead and be again.
And as listen, we're going to go and look at the network interface configuration with four Windows 10 and also with a boon to we're gonna do it through the gooey, and we also do it with thesis Eli.
We'll also verify basic connectivity with our gateway with ICMP or Ping.
So this is a good time to where, if you have the ability to set up a VM or virtual machine, I would suggest doing with the boon to you can get it for free. You can also get a evil copy of Windows 10 enterprise through technology. I believe it is,
uh, for free as well. I think it's a 90 day trial. That's what I'm using today.
And if you are like me and the trial is expired, it will shut down like every hour or two, so that's fun.
So when the standard we can go ahead and configure, verify with you weak command or CND that e x, c or Power shell. First off, we're gonna do the gooey. You know, you just going to control panel that we're considering. Center could change adapter settings or you can right click the
about a segment. So let's go ahead and bring it up here. It's not it.
Go and bring it up here,
so you get CMD open. Let's go ahead. Open Internet sittings.
Let's go to either nets
change adapter settings
so that I'll bring it up. Same thing is going to command prompts. Right click here. What of properties? You might have to accept the USC prompt when you get it
and we'll double click on the I P. V four. And here we can go ahead and set it to whatever we want.
So it was good. 10 12 50
and let's do it on a
Gateway was it, too? That's gotta change because that will not route.
So it was going and change that as well.
It won't right right now is either because that's not what I have a gateway said to.
But just for sake, let's hit. Okay, let's hit. Okay,
Amos, do a little bit of an I p config. Verify that cities went through.
We have a 10 12 50 with the default gateway. Their dance of them ask, Don't want 28.
All right, So next year we're gonna go ahead and do it. Your command. Promise We bring up the will, use the nets, each command. So first, let me go ahead and bring up the VM.
Move it down here so we could still see what we're doing.
Notice. Age in her face.
I p said address name equals and I know what is either nukes. We just looked at it, set it to a static address,
and we want to set it back to 19 to 16 1 50
with a sudden that mask of slash 24.
And I want to give it the hopefully the correct gateway. I don't actually remember to be honest with you,
and we wanted to be true. Enter.
And here we run into the first problem. We gotta be running as administrator, so it's close out of it.
It's type in cmd
right click. Run his admin.
Yes, except front. And let's try this again.
Can you can go through quickly, teach
You will see it that way.
I was 16 1 debts
50 to 50. Fire to prefer to 01 17 16 1 That one.
You know, once we true.
So just to verify that it changed, we could do, I think it figure again.
And we're now we see it. It has changed
with the proper settings.
So now if you want to set up our DNS here, you could do a clear screen, so you can still see.
All right, here. We got a that's start, DNs cache
and should already be starting, which is good. I was going to notice h
in her face. Iptv four sit DNS name.
He goes, If you remember, the interface was either nuts
aesthetic. And I'm gonna just do my current D h c p server,
even though it will not right to it
just to verify that we can actually set it here,
and it might take a second.
All right, so you can make that it does not exist because currently can't route to it.
But if we do this All right, I'm gonna kind of bring this back up here. Scroll up
to where it's in it is.
You'll see that it still took it as a DNS server, right?
But it first tried to resolve. It couldn't. So I warned us that it's not reachable,
but that's OK, because we're not
actually resolving DNS names that are live environment currently.
So if we look at the last version for Windows 10 we're gonna look at Power Shell.
So let's go ahead and bring up the VM again
And let's get rid. Actually, will just minimize command. Prompt will minimize this.
And let's go ahead and just bring in Power Shell.
I want to right click and his go ahead and run. It is admin this time.
Wait for the load.
All right, let's go and bring it down here.
Bring in New on
your face Alias.
It's much right P
address. Let's just follow this year
with the that's.
Actually we don't want to give it a 0.1, so it's just give it a 10.
Yeah, let's go The prefix length of 24
one night. You 168 50 That one
and we'll see the works.
Oh, I spelled it wrong. That happens
internally. too much.
So let's go back and had that second butter there.
so it looks like we went through
Let's do an I p config.
We have set our interface I p address
eso. That's some issues of ran with partial is Sometimes it will add a second default gateway.
And also, if you notice that because we use new I p address
it kept the previous one. Right. So this way, if we go into looking to here
looking at properties, look at I p before we're going to advance, you'll actually see that second interface I p address in second in her face I p there as well.
So sometimes it's gonna work out if you have multiple V lines you're looking at, um, and you could set up your switchboard as a trunk port instead of looking at it as a You can actually tag. You could be lying tag your interfaces with the correct driver,
so I'm gonna go ahead and get rid of these move.
So we just kept those ones all right,
going through this DNS server as well, so it doesn't accidentally complain about it.
Bring up cnd Let's just do an i p config
and we're back to normal.
So today's lesson We went over the Windows 10 network interface configuration. We used command prompt power show and the different buoys.
So if ah, quick quiz here. What command is used in the command? Prompt to change these static I p settings for an interface.
Give me a few seconds.
All right. If you guessed net S h, you would be correct. The i p config command is used to verify our settings Debates. Firewall is, as you can imagine, use for firewall settings, and it's look up is used to check with DNS servers to check the domain name.
GOP Sen. It's so the next video, we'll be going over the A boon to I p settings and configuration.
Thank you and have a wonderful day