Hello and welcome back to I seen Do you want interconnecting Cisco Networking devices are one. This is the module five line.
I'm trend hero in this video menstruation, things that hopefully you should learn to module five and you should be able to figure it's the devices with these commands here now.
So it's always I want to show you the lab diagram, and then we will go through the lab set up on just pause the video. Take screenshots. Use what you can for this.
All right, so we had kind of have a modified version of the lad diagram that we've been using. If you noticed the suddenness of the top and the land subjects top and bottom and write. All begin with one. So to 16 now.
And the links between a router begin with 10 11
Um, same thing. So switch three is gonna just be working as a layer to switch. We're not gonna have I p routing enabled.
We're gonna set up the router on a stick on router three
and let me go ahead. Just getting still live set up here.
So had first just put a base, configure new devices put a user name password. Ah, enable password holding most named domain name. Set your I p addresses on your routers.
Um, I don't know about doing some interfaces that comes a step for, um,
is that your logging synchronous all your different. You know, put on S s a just six feet two
organ mogul. That kind of thing's just gonna put a good base configure on it.
And at the end of story, what the base could figures that I use
and the next we're gonna add the access ports on switch three to the proper view. Minds being 30 and 50. And Japan, where you had the device is plugged in.
And then we're gonna create the trunk ports from the interface cadet connects the switches to the routers. We're gonna set up the end step forward to set up the link from Router three to switch three as the router on a stick. Meaning we include those sub interface is now
and set fire. We're gonna verify the trunk port is acting as a trunk. Ports by pinging from the 50 device to the,
Uh, where are the device on the United 30 is gonna be set for D H E P, which comes at a later step where we create the server stuff. Six, We're gonna go ahead and able, ready to on all the routers for all the lands, including the links between the routers.
Go ahead and set The passive interfaces for all ports except for the land are now the landline. Excuse me? The interfere the links that are in between the routers passive interface
except for the links between the writers
stuff. Seven. We're gonna go ahead and set up broader one as the D A. C P server for V. Lane 30 and ensure that PC three receives an I. P. And there you see the difference. Ah, d a c p settings. So Deanna said the lease proper default gateway for B 9 30
Good said that don't mean they don't want you cyber lives. And you already have one that you have set for your lab. Go ahead and use that. That's fine. Ah, but we don't want to use the I. P range 17 to 16 3 that one through
and members for this to work. Someone one of those routers is gonna need the i p helper address command.
When you're done, test all the pings, see if you're gonna get hit. Each villain each interface.
Sure that you have full connectivity. And that PC three received an I P address,
so let you to it. And go ahead and take screenshots. Pause video rewind. Do it when you do, I'll give you a few seconds here, and then I will go through my lab. Walk through.
All right. So I'm gonna bring up the party session. Hopefully, yes. How are complete now. Otherwise, just take this step by step. Walk with me.
don't feel bad if you messed up, you can't figure out this is my third time today doing this because I kept messing up between recording equipment
and messing up i p addresses because it is so similar to the property or they are labs we had,
um So if you if you think you figure out, go back, check your i p addresses. If you just want to know, stick around. I'm gonna bring about putti session here.
We're on switch one, and I'm gonna show you the base configured I use
is gonna be right here.
So we have the host name. Domain name? No, I P Domain. Look up Line counsel zero logging synchronous We don't want just one time out
on R V t Y lines. Meaning the sensation. Tell nets we want logging synchronous as well. We wanted to time out in 60 minutes.
We wanted to use the log in the local database. Username We want the Onley. Sshh enabled
I have my username password my enable password
as a stage version two and then we generate the crypto key for us A sage
So really, because I've done this three times a day, I don't want to take about this amount of commands. So what weakened Dio is going to hear?
So the only thing you need to dio if you just you can set up here the way that I haven't set up is I just need to be in this privileged exact mode
or enable mode, as you might call it. So you do is just bring a party section after you copied it and just paste it.
Um, there's a wonderful way to use this for doing mass based good figs like this. So I'm just gonna go into a copyright start to make sure everything stays the same. And I'm gonna go ahead and move the, uh, con support to switch to, and I'm gonna run through the base configured on switch to switch three.
Uh, and I'll let you see the one for Roger one here.
All right. So it should be on rather one now to enable.
And so here's what we have here. Host name? Don't be domain a ni p.
It's all the same all the way down to here where we're actually going to include the interface I P addresses now. So this is the land interface for outer one.
This is the serial link to Router three. As you see, I included description as well.
So I'm gonna go ahead and copy this one
on. We'll go. Just going based.
What happened? Something. It didn't like one of those things.
This is the problem with this.
I didn't Oh, I didn't I didn't copy company, that's why. Okay.
Make sure you get the cuff T.
check. The other one's real quick. Yeah.
All right, Miss, take most of this. Is your problem with copy pay? Sometimes.
Make sure that I got this.
so when we get back into configure T, which one is wrong? Serial 00
on. Let's do a show. I p interface brief. Make sure we have both those i p's.
Okay, so I'm gonna go ahead and fast forward. I want to go in a router to As you see, it's the same thing. I have my land. I p have my link to router three.
And it's just your normal base config. So I'm gonna go ahead and fast forward and we'll go through a router two and three.
All right, So if you look the commands here for Router three, you might notice that there is no interface fast Ethernet 00 on this one. It's because we have the link throughout her, too, And like to write her one
the Remember that we're going to creating a sub in our faces for
uh, Cassie Turner. Thanks.
So this party pasted in
sees us so much time.
all right. So now we're into
we're on to step two.
We're gonna add those switch ports on three XS ports to proper view and someone go ahead and put in a 20 to 3.
All right, so it's getting to configure terminal on her face.
I have a copy paste for this.
All right, so we have interface fetching it. 04 This is where my surface laptops plugged in.
Switch port mod access. We're out of the way and 30
I have a raspberry pi on there. Still were more access.
And Gillian 50. So it's a copy of this
Actually, we should do the ways. The thing.
All right, so our switchboards are on the correct view ends now, so I'm just gonna go ahead and
take the shortcut. I'm gonna go ahead and put the trunk port on this one already as well here. So, villain
Remember the because this is a layer three switch. Sometimes you have to add that trunk encapsulation down one Q in there.
As you see, the two other ones you don't need Thio,
so I'm just gonna copy this in.
based. And I'm gonna go do the same to switch one switch to
Alright, here we go. On Router three
on what we gotta do here. We should be on step four. We're gonna create the router on a stick
somewhere. We're gonna include the sub interfaces on this one, so I'm gonna bring up the
All right in her face.
If a 0.30 remember that 0.30 years and identify WR
the description and the cancellation. Doubt one Q and this is Villain 30.
This is the P address for it on a slash 24. This I p addresses the default Gateway address for the mind. 30. Don't forget
for being late 50 Because that's how I like it.
Description had a cancellation.
I p addresses the default gateway for Reliant 50 devices.
And remember, at the end we have to know Shut that actual physical interface.
Hey, still no, it did not like something.
Oh, I should notice it. And she said exits
there. That shouldn't see
Even we can't be paste. I still have issues. It's just
we do a show, I pee in his brief to steal rents. I believe we still need to know Shut our serial ports.
So it's getting and do that. Serial 0000
And I will go ahead and just know shut. The other two routers were quick as well.
All right. So you sure? You interface brief,
uh, all the runners up
and we should be able to ping
the first of ice here. That wonder 50.
Ah, cool. Okay, good.
So let's go ahead and see. We have next.
So under six set, rip the two
on all routers for all lands. Passive interfaces on the land ports. Where the peces.
OK, print the poor decision. We're on. Roger. One will set that one first.
Cheater. No pad here.
Configure terminal router rip. Remember, we're going to do version too, because version one is class full pouting.
I want no auto summary that way. It actually
advertises Thean vivid Jewel sub nets not a summer summarize sub net.
Um we're gonna set all interfaces is passive. And then we're gonna set the serial one as not passive.
We want the class full network.
Um, 10 000 class full 1 70 16 mur What this says is advertised the interface I, p's that had this address
advertises sub nights that are honest address.
It doesn't actually at, say, advertise this network.
It has to be here. We have to have a face that
so I'm gonna go ahead and do the copy paste thing
and I'm gonna go ahead. The only difference is between the three routers is where we had that second language. Except for no passive on router three.
Or in that, I'm gonna go ahead and fast for the video and go throughout her two and three with the same thing.
All right, now that we have routing enabled, if we do a show B roads,
I should have a full routing table. Now
let's take a look. We have not received the okay. Yeah, We have received the one from Router One via this,
and we received the senate on Router Tuas. Well,
so theoretically, we should be able to do a ping.
I hit the number 1 to 16 1 50
And we should We'll do 2 to 50.
And 3 50 is not set yet. Remember, it's gonna be set in the next
Cool. Okay, so I can hit all devices now in the different segments.
So, lastly, that moves us into the step seven. We're going to set up a D A C P server for Villain 30 on router one, and we're gonna sure that PC three years serves an I p address with those,
Um, anyway, so one thing led to do First, I'm gonna set up the i p helper address on Router three.
Hopefully, you guys figure out that's the one you need to set it on. So we're gonna set it on the interface f a 00 That's 30
10 1111 because that is where the
actual D h E P. Server is gonna be.
Check when she She'd make sure I did that right.
I'm gonna go plug into rather one here
right now on runner born. I'm gonna bring a cheat sheet because double check those notes and I don't want a fit thing or something.
That's what I did last time and
All right, so we have configured terminal. We're going to exclude the three doubt. One address through the $3.49.
We're gonna get in this pool V lin, 30 pool. You could name it kind of whatever you want. As long as is meaningful to you.
We're going to do the network 3.0 slash 24. If you did the 2 35 to divide to be defied 350.0. That's fine.
I like to cider notations when I can use him. Ah, default. Rounder
is gonna be that land side interface on Router three for viewing 30 or the sub interface, I should say
the d n a server one a one a lease for zero days,
23 hours and 57 minutes with the domain name of cyber ery labs dot com.
So I'm gonna go ahead and get a copy paste thing,
and everything should be good.
Change. It should end, not an exit.
And I'm gonna go ahead and reset the interface on my view and 30 device,
because right now it has just that self assigned I p. So it's not trying to look for a night p address, so you may have to do the same thing in your devices. If you have had issues, hopefully figure that out. Otherwise, give it a reset, See if see, that helps. So
All right. Already went through here.
So now if we do a show I p D H e p binding.
We have that device aren't cold already.
This is Roger. One being the D A. C P. Server for of United 30 on a different subject.
It's kind of cool. We brought it all away for it.
So if you do a show, I p D h e p pool uh, land 30. Cool.
Here we have one least address. Here is our range. And remember, this one doesn't have
the what's excluded because the exclusion is a global configured.
command. Sorry. And then the next address that will be assigned is this one.
we should be good to go. I'm just gonna go ahead and sits. I'm gonna do my pings from the Cali box.
Let's see what happens. So do run out if configure.
We're on 17 to 16 1 50
So make sure you hit our
Let's go to Router 3 10 Don't want one.
We can talk the router. Three.
We can talk to you about 1 30
I must talk to the 50.
Good to go. And let's check the last one down there at the very bottom.
All right, so we have all the pings.
So hopefully you has got telling I was a longer lab. I understand. Hopefully I stuck around for the whole thing. Hopefully learned it. If you didn't please go back and redo it. Um, it's not gonna hurt to redo it. I mean, I messed up
three times on the whole thing today.
you can never have enough practice.
As always. If you have questions, need help. Feel free to shoot the message. Otherwise, good job in this lab today. And I look forward to seeing you next month