Time
1 hour 19 minutes
Difficulty
Beginner
CEU/CPE
2

Video Transcription

00:00
Logan, welcome back to Gina's three Introduction. This is absurd. 1 to 4 creating a routed network.
00:07
And in this episode, we're gonna go ahead and look at utilizing that Iowa's router template that we had already built in the previous listen to help build are routed network.
00:17
We're gonna go and jump right in with building that network coming. I get my vm up. I'm still exactly where we were previously. I'm just gonna take you on this one. I minimize my solar winds here.
00:28
So now we still have this. What I'm actually gonna do is I'm gonna delete the
00:33
links between the routers. Here
00:36
is right. Click delete.
00:40
Excuse me. Not routers between the PCs.
00:44
So what I'm gonna do is I'm just gonna move it just like this, and we're gonna grab a door switch
00:49
store right on a pc to
00:52
So let's go ahead. I'm gonna change the sudden it's of the actual
00:59
I p address for PC to to attend out network.
01:03
Remember that PC one is 1 91 68 That one such 24.
01:08
So go ahead and get into here. We're gonna go into 10. 1111
01:15
I shall go 50.
01:17
They want us to be too defiant to defy to certify that zero. And here we actually did put in a default gateway. So we're gonna do 10 111
01:26
We're the default gateway.
01:30
All right, So I worked properly. I'm gonna go ahead at where we had to put in the default gateway for PC one now,
01:37
So I'm gonna go ahead and bring that up.
01:40
Well,
01:42
so we enter a few times to bring the sooner we're on I p
01:46
one, I do once exit one that 1 52 certified to certify to 55 0 and the default gateway of 1921681 That one
01:57
we'll enter.
02:00
You know, the gateway is gonna be the the routers I p address that is facing these computers.
02:09
So now let's go ahead and just connect these
02:14
to these are zero
02:15
Ethan at seven. To rotor. Wonderful season zero.
02:21
Get that second. Either zero to here.
02:24
18 at 72 presidents or one.
02:30
We'll click off this now to go ahead and bring up the router council again. That should already be in our session in here.
02:38
So if we enter a few times. Show I p brought it up again.
02:45
Okay, let's just back up. I don't know what has happened.
02:49
Show I p Interface Reef. See what's going on with this. So everything is down the way. Should be
02:54
so
02:57
I was going to configure terminal
03:00
interface F A 00
03:02
It was addressed to you. 1921681 That one
03:08
departed five
03:12
2 55 0
03:15
And
03:16
they know shuts. Go interface. If a 01
03:22
i p address
03:24
turned that one, that one that 1 to 55 to divide to drive zero.
03:30
The way no shuts is on that as well.
03:35
And remember, don't worry about these commands so much. Just
03:38
basically, copy and paste when I'm typing in. This is just a test. Our network we want to verify everything is working. Wanted, actually. Just get a basic network going.
03:47
Unless you know what you're doing. Then go ahead. But don't. If you don't know, just type in what I'm typing in. We'll go through it later on.
03:55
Excuse me. Well, not not in this lesson. If you guys actually want Thio, you can go to the I C. Ndy. Course actually know the instructor using pretty good dude
04:04
anyway, so if we do a show, I p interface brief.
04:10
Come on.
04:13
All right, so now let's go ahead. Insurance. Ping our devices. 1 94 681 50
04:18
Hopefully. Okay. So that 1st 1 that you see is actually an AARP tryingto figure out where it's at.
04:25
So now we're gonna ping 10. 111 50. Make sure that we can work here.
04:32
All right, so we're going to do now, But go ahead. And because these are connected rows that should be in the routing table Show up, you're out.
04:43
So I'm gonna go into PC one,
04:45
and we're gonna try and King
04:47
PC to
04:49
and we got connection.
04:53
That's just very fire that it worked from PC to
04:58
being 1921681 debt 50.
05:01
And we got connection from there as well. We have created a basic routed networks. There are different networks PC one pc to on different networks.
05:10
So it's gonna go, um,
05:13
that is a
05:14
basic, crowded network ingenious tree utilizing our Cisco IOS template that we built
05:19
there. We go ahead, minimize that.
05:21
And in the next episode, Sadly, we're actually gonna look. Att? The Genesis three. Don Imus Limitations for C c A.
05:30
As always, if you guys have questions, need help. Feel free to shoot me. Message. Otherwise, thank you for watching this lesson of it for deceiving the rest of them.

Up Next

Network Fundamentals Using GNS3

This course will enable students to install and configure a basic GNS3 network lab that could later be used for other networking courses such as ICND1 and ICND2. GNS3 is an open source, free software option for graphical network simulations that support a variety of vendor devices.

Instructed By

Instructor Profile Image
Trenton Darrow
Network Engineer at NCI Information Systems, Inc
Instructor