Time
1 hour 19 minutes
Difficulty
Beginner
CEU/CPE
2

Video Transcription

00:00
Hello and welcome back to Gina's three. Introduction. This is absolute. 1 to 2. We're gonna go ahead and create a basic network in our lab.
00:08
So I was sort of review. We're gonna go ahead and do the first run overview of kind of lay of the land of Gina's three. Next, we'll go out and create a basic network between two PCs and a switch. And lastly, we're gonna go ahead and test that network with a ping command and sure that it actually works.
00:24
So we go ahead and just jump right in. We're gonna bring up my VM here every year. Guys, a normal computer, whatever you're using.
00:31
So I'd still have it on the same place where we left off after you insulation. I'm gonna close out of this. Just double click, GMs three. We're gonna go ahead and just let it do its thing here. We're gonna give it a second,
00:41
All right? So when we get to this page, what we're what we want is I'm just gonna go ahead and exit out of this. Just cancel our ex. Whatever you want to d'oh
00:51
clothes out of the set of Wizard, we don't need to go through right now.
00:58
All right, So once we get to this page, I'm gonna go ahead and maximize this year,
01:03
Um, we're gonna hit the little open folder here for a blank new project. I'm just gonna call this side library.
01:11
G n s. Three
01:14
it. Okay, we get presented with this blank template
01:17
and always the first thing you have to dio when you get to this is going your preferences
01:23
and you have to change your to the dark.
01:27
If you're not on charcoal, you know
01:30
you can't even g n s three. I don't know anyway, so let's go ahead and just set up a basic network. Now we have the later land. So you have your routers here. Your switches here, your devices mean your computers and our devices. Servers here,
01:45
the secure devices, air. You know, if you have essays ready, set up stuff like that, that's where those would be. Lastly, have your cabling tool down here. This well, actually, like, connect your PC, dear switch and stuff like that, you're determined. Where exactly? Plug it into
01:59
here. You can actually start the all nodes. It'll stop all the nodes. Pause them,
02:06
You could actually add a note to here. We can cause Gina's three lab,
02:12
you know,
02:13
So it's quite a few things You can insert a picture if you want. So if you have, you know, let's say a
02:21
a floor diagram to a building. You can actually insert your all your map ings properly.
02:27
So for now, anyway, we're gonna go ahead and just grab A couple of these basic computers were to scroll down to where we see the PCs. We're going to go ahead and just drag and drop one out of here.
02:38
I wanna drag and drop a 2nd 1 onto here,
02:43
zoom and just a little bit here,
02:46
Genius tree love. I'm gonna go ahead and just toss. Ah, Ethernet switch out of here.
02:52
This is just your basic switch for Janis three.
02:55
Right? So if you re right, click, we're gonna go to edit configure
03:01
and for here. I'm just gonna change this to a
03:06
This is gonna be 0.50
03:12
on a gonna change this to a slash
03:16
24 p c one save
03:22
pc to. We're going to go in and add it to config.
03:27
I'm just gonna change him two dots.
03:30
60 animal. Your same thing changes sub net match 2 to 35 to 45 to 55 0
03:39
And yet, if you don't understand the commands, they're like what this is really? Um,
03:46
don't worry about a whole lot. We're just We're just testing it to make sure that it works. So don't worry about it for now.
03:53
So are these Have, uh,
03:54
these have eyepiece. So I'm gonna get my link tool click on PC one to P C zero,
04:00
and we're gonna go into Internet one just because
04:05
just click on there
04:08
to return it to its original. It is Run. And I was going to go ahead and hit this play button to start up all the P. C. S. Here.
04:15
I'm gonna click off Click on this again to turn off your link
04:19
here. We're gonna go right into the council here.
04:23
I'm gonna try Ping the PC to We want to make sure that our network is actually working properly.
04:30
All right, so I'm gonna trying to set the I pee in here real quick. 19268
04:38
1 50 And thankfully, support siders would do a slash 24
04:44
I'm gonna check for duplicate addresses.
04:48
So then I'm gonna go ahead and do the same thing a PC to I'm not sure if that figure it through.
04:56
So, counsel,
04:58
we'll take this a second to come up as well.
05:01
So we'll run an I p 19 to that one succeeds that 1.60 on a
05:09
I want to do a slasher movie force just easier.
05:15
So now we knew a ping 1 91 681.50
05:24
All right, so now we're getting replies
05:26
That edit config thing must not have been going through. I'm not entirely sure,
05:30
but if we said the i p just like we did here
05:33
in the consul,
05:35
we should be able to pay back in force.
05:39
Wanted that 60.
05:41
So we're getting communication. So our network is working. It is
05:46
working the way it should be with this.
05:50
Anyway, something go ahead and minimize this. This is our basic network for Gina's three.
05:56
Um,
05:57
there's a couple tools you can have in here.
06:00
Um, it's kind of like this whole taskbar is roll up into each thing,
06:04
zooming in and out preferences. Remember,
06:08
we always want the charcoal one I don't have a way.
06:11
Just always, d'oh.
06:15
Anyway, so I'm gonna go ahead and minimize this move on some. Excellent. So in our next episode, we're gonna go ahead and actually create that Cisco Iowa's router template from that image that we already have that we went through one of the earlier ones. I have the 37. 45 on. I was 12. We're gonna go ahead and create that router template.
06:34
So is always if you guys have questions, need help. Feel free to shoot me. Message. Otherwise, thank you for watching this lesson. I look forward to seeing the rest of them.

Up Next

Network Fundamentals Using GNS3

This course will enable students to install and configure a basic GNS3 network lab that could later be used for other networking courses such as ICND1 and ICND2. GNS3 is an open source, free software option for graphical network simulations that support a variety of vendor devices.

Instructed By

Instructor Profile Image
Trenton Darrow
Network Engineer at NCI Information Systems, Inc
Instructor