Surge of Attacks Targeting Network Infrastructure Devices – What You Need to Know

save
Share and earn Cybytes
Facebook Twitter Google+ LinkedIn Email

Based on the recent surge of attacks on network devices by Russian state-sponsored cyber actors, the US-CERT has released Technical Alert (TA18-106A). As of now, targets are primarily government and private-sector organizations, critical infrastructure providers and the internet service providers (ISPs) that support U.S. infrastructure. Tenable has warned about such attacks before, including as recently as last week.

Impact assessment

Network devices are ideal targets because all traffic must traverse these critical devices. Organizations that use legacy, unencrypted protocols to manage hosts and services make successful credential harvesting easy for cyber actors. An attacker who has gained access to an organization’s gateway router can monitor, modify and deny traffic to and from the device. Simply put, whoever controls the router controls the data flowing through it.

According to the US CERT, Russian state-sponsored cyber actors have conducted both broad-scale and targeted scanning of internet address spaces. Broad scanning helps attackers identify enabled internet-facing ports and services, conduct device fingerprinting and discover vulnerable network infrastructure devices. Vulnerable protocols targeted in this scanning include:

  • Telnet (port 23)
  • HTTP (port 80)
  • SNMP (port 161/162)
  • SMI (port 4786)

However, an attacker who gains control of a router between Industrial Control Systems – Supervisory Control and Data Acquisition (ICS-SCADA) sensors and the controllers in a critical infrastructure, such as the energy sector, can manipulate the messages, creating dangerous configurations that could lead to loss of service or physical destruction.

Vulnerability details

For several years now, cyber actors have been targeting and exploiting enterprise-class and SOHO/residential routers and switches worldwide. Many times, cyber actors do not need to leverage zero-day vulnerabilities or install malicious software to exploit these devices. Instead, these cyber actors rely on legacy, weak protocols and services associated with network administrative activities.

Network devices like routers and switches are often easy targets because they’re typically not maintained to the same standard as other devices, such as desktops and servers. Many times, default accounts and passwords are not changed, firmware is not updated and devices are not hardened. Devices such as SOHO and residential routers are most vulnerable. Once compromised, they can be used to pivot to other devices.

These weak security practices may enable cyber actors to:

  • Identify vulnerable devices
  • Extract device configurations
  • Map internal network architectures
  • Harvest login credentials
  • Masquerade as privileged users

Additionally, cyber actors may be able to modify device firmware, operating systems and configurations as well as copy, modify, deny or redirect traffic. Often, these cyber actors are successful because the devices:

  • Have legacy unencrypted protocols or unauthenticated services running
  • Have not been sufficiently hardened or are no longer supported (EOL)
  • Have not been updated or patched

All these factors give cyber actors the ability to potentially gain both intermittent and persistent access to critical infrastructure.

Exploitation

In many cases, exploitation begins with a brute force attack against Telnet and SSH to obtain login credentials. Weak and commonly used passwords or passwords that have previously been harvested by illicit activities are used for exploitation. However, if default accounts exist, credentials can be easily obtained, which will give full access to these devices. Password hashes may also be extracted from configurations via Simple Network Management Protocol (SNMP) and Cisco Smart Install (SMI) enabled device scanning.

Urgently required actions

Tenable suggests analyzing the network to determine whether any of the specific services listed below are running and/or ports are open. Refer to the vendor-specific guidance for the make and model of network devices in operation.

The US-CERT recommends that all organizations take the following actions:

  • Do not allow unencrypted (i.e., plain text) management protocols (e.g., Telnet) to enter an organization from the internet. When encrypted protocols such as SSH, HTTPS or TLS are not possible, management activities from outside the organization should be done through an encrypted VPN where both ends are mutually authenticated.
  • Do not allow internet access to the management interface of any network device. The best practice is to block internet-sourced access to the device management interface and restrict device management to an internal trusted and whitelisted host or LAN. If access to the management interface cannot be restricted to an internal trusted network, restrict remote management access via encrypted VPN capability where both ends are mutually authenticated. Whitelist the network or host from which the VPN connection is allowed, and deny all others.
  • Disable legacy unencrypted protocols such as Telnet and SNMPv1 or v2c. Where possible, use modern encrypted protocols such as SSH and SNMPv3. Harden the encrypted protocols based on current best security practices. DHS strongly advises owners and operators to retire and replace legacy devices that cannot be configured to use SNMPv3.
  • Immediately change default passwords and enforce a strong password policy. Do not reuse the same password across multiple devices. Each device should have a unique password. Where possible, avoid legacy password-based authentication, and implement two-factor authentication based on public-private keys. See NCCIC/US-CERT TA13-175A – Risks of Default Passwords on the Internet, last revised October 7, 2016.

Further detailed information can be found in the ‘Solution’ and ‘General Mitigation’ section of the US-CERT Alert (TA18-106A).

Identifying affected systems

Tenable has pre-existing detection via these Nessus plugins:

Get more information

Share this post and earn Cybytes
Facebook Twitter Google+ LinkedIn Email
Follow
1589 Followers
About Tenable
Tenable™, Inc. is the Cyber Exposure company. Over 24,000 organizations of all sizes around the globe rely on Tenable to manage and measure their modern attack surface to accurately understand and reduce cyber risk. As the creator of Nessus®, Tenable built its platform from the ground up to deeply understand assets, networks and vulnerabilities, extending this knowledge and expertise into Tenable.io™ to deliver the world’s first platform to provide live visibility into any asset on any computing platform. Tenable customers include over 50 percent of the Fortune 500, large government agencies and organizations across the private and public sectors. Learn more at tenable.com.
Promoted Content
Five Steps to Building a Successful Vulnerability Management Program
Is your vulnerability management program struggling? Despite proven technology solutions and the best efforts of IT teams, unresolved vulnerabilities remain an ongoing source of friction and frustration in many organizations. Regardless of how many vulnerabilities are fixed, there will always be vulnerabilities that can’t easily be remediated – and too often, finger-pointing between IT teams and business groups can ensue.

Our Revolution

We believe Cyber Security training should be free, for everyone, FOREVER. Everyone, everywhere, deserves the OPPORTUNITY to learn, begin and grow a career in this fascinating field. Therefore, Cybrary is a free community where people, companies and training come together to give everyone the ability to collaborate in an open source way that is revolutionizing the cyber security educational experience.

Cybrary On The Go

Get the Cybrary app for Android for online and offline viewing of our lessons.

Get it on Google Play
 

Support Cybrary

Donate Here to Get This Month's Donor Badge

 
Skip to toolbar

We recommend always using caution when following any link

Are you sure you want to continue?

Continue
Cancel