Router: The First Line of Defense or the First Mistake?

June 17, 2018 | Views: 4555

Begin Learning Cyber Security for FREE Now!

FREE REGISTRATIONAlready a Member Login Here

Routers are those devices that nearly everyone has at home, but most of them have serious security flaws and are barely understood.

Let’s be honest: we talk about security, regulations, pen tests, etc., but those topics only apply to companies. How many standard households have their routers poorly configured, either because of the ISP technician’s lack of effort (most of them only plug it in, turn on the equipment, and they are out of the house) or because of the owner’s lack of technological skills?

The owner of the router doesn’t need to know what WPS is, what encryption is, what the dangers of open networks are, etc. They only have to pay for the service, and most of them think the service should be secure enough (unfortunaly, it is not).

Lots of domestic networks are attacked because they are easy to target, most of the users connect everything online, and they don’t have minimal security. Security should start at the router and be properly configured by the ISP!

  • The default passwords most routers use are too simple and are usually are made with known algorithms. Also, the routers don’t require (some only recommend) change of password. Not only can the default network access password be weak, but the router control panel password is usually default also.
  • If the client wants to use the default password, he should be reminded to remove the sticker from the back of the router (that sticker that anyone, even the “cleaning lady” can read) that has the default password.
  • The default setup allows wireless access to the main control panel. There is nothing wrong with this, and that option is needed (the problem is that some routers don’t allow disabling of wireless access), but the client should be informed of the risks and security slack that wireless allows. With that information, the client should make the decision of whether he wants to connect only by cable or by wireless.
  • Most routers have WPS enabled by default. Usually, this is left on by default without proper configuration or even warning of the danger of having WPS enabled (when most of the time it is not even used). It’s one thing if the client has a WPS button that requires physical access, but always having WPS on is different because having it on makes it easier for attackers to break in.
  • Encryption: Luckily for us, the default encryption is WPA2. However, we still see lots of WEP-encrypted networks (because many people have no clue what that is, or because WEP is the default on old equipment) or networks with no encryption at all. Most normal users (non-tech savvy users) have no idea of the risks that WEP creates.
  • Open ports are also a problem. Normally, users simply get the router working and start doing their normal routines (check email, Facebook, etc.), without even checking for open ports. Lots of routers allow for SSH or Telnet that can allow the attacker to send remote commands. Some routers allow the disabling of those services, but some don’t. When we can’t disable services like that, it’s a risk! Not only that, but on some routers, changing the control panel access password doesn’t change the SSH/Telnet access, leaving it in default. While the web form control panel blocks access after three to five wrong login attempts (blocks for about one minute), the SSH and Telnet services don’t. That means the attacker can use brute force on the router credentials more easily with those open ports.
  • Frequency conflicts aren’t exactly a “security issue,” but who likes slow Internet? Not only does our network slow down, but every network nearby also gets slowed down.
    Most ISP technicians install the router without even checking nearby networks to see if they could configure it to another channel that has less interference. If, like me, you live in a full building with lots of networks, then you can easily see that most routers are usually left on the same channel, and residents mostly complain about slow Internet (until they call the ISP and they are instructed to reboot the router, which will make it “hop” to another less used channel). Good network managing could prevent lots of these situations.
  • Firmware is the least updated part of any domestic network. Most people don’t have a clue that the router has to be updated, and they are not informed of that by the ISP. While the PCs and other devices have automatic updates, the router is usually left unprotected because of a lack of firmware updates. Not only that, but most companies don’t even spend time making firmware updates to fix flaws of cheap domestic routers.

Final Thoughts

All of these vulnerabilities have to stop if we want data security. This type of mindset has to change! The ISPs have to understand the risks of “not caring” about the client’s security, leaving everything to the client to know what is best or not.

The clients should have security in mind, try to understand the equipment they want to use, and, especially important, they should test it! They should not just believe it’s safe because the ISP says so.

Share with Friends
FacebookTwitterGoogle+LinkedInEmail
Use Cybytes and
Tip the Author!
Join
Share with Friends
FacebookTwitterGoogle+LinkedInEmail
Ready to share your knowledge and expertise?
1 Comment
  1. Awesome Writing

Comment on This

You must be logged in to post a comment.

Our Revolution

We believe Cyber Security training should be free, for everyone, FOREVER. Everyone, everywhere, deserves the OPPORTUNITY to learn, begin and grow a career in this fascinating field. Therefore, Cybrary is a free community where people, companies and training come together to give everyone the ability to collaborate in an open source way that is revolutionizing the cyber security educational experience.

Cybrary On The Go

Get the Cybrary app for Android for online and offline viewing of our lessons.

Get it on Google Play
 

Support Cybrary

Donate Here to Get This Month's Donor Badge

 
Skip to toolbar

We recommend always using caution when following any link

Are you sure you want to continue?

Continue
Cancel